Skip to main content

Curated by PaddleWays

Morton to Bremer

7.6 mi whitewater route on the Tilton River in Washington

  • Whitewater · Class II–III

Map of the Morton to Bremer route, from Chapman Access to Bremer Access
  • Route
  • Put-in
  • Take-out

Level right now

How Morton to Bremer is running today

Recommended level from American Whitewater, on the gauge at Bear Canyon Creek.

Route facts

Morton to Bremer at a glance

Distance
7.6 mi
Paddle time
~2 hrs
Type
Whitewater · Class II–III
Recommended level
800–2,000 cfsfrom American Whitewater
Good for
Intermediate paddlers

About this route

Paddling Morton to Bremer

The Morton to Bremer section of the Tilton River is a classic 7.6-mile Class II-III run in Lewis County, Washington.

The best rapids are concentrated just below the put-in and again below the confluence with the North Fork Tilton, which joins about halfway through the run and significantly increases the water volume.

Paddlers should be aware that the water level at the put-in will be much lower than the gauge reading. The North Fork Tilton enters about halfway through the run and adds approximately 50% more flow, changing the character of the river in the second half.

This section offers a mix of enjoyable whitewater in a scenic setting, suitable for intermediate paddlers with some whitewater experience.

Put-in and take-out

  • Put-in

    Chapman Access

  • Take-out

    Bremer Access

Hazards

Hazards on Morton to Bremer

No hazards are marked on Morton to Bremer yet. That is not the same as none being there: if you find one, report it for the next paddler.

From the community

Morton to Bremer trip reports

Nobody has shared a trip on Morton to Bremer yet. Paddle it, then tell the next paddler how it went.

Flows & weather (10 day forecast)

The gauges near Morton to Bremer and the forecast where it starts, so you can pick your day.

No forecast data available.

Close by

Routes near Morton to Bremer

Curated routes on other waters within an hour or so, nearest first.

Curated by PaddleWays

RouteFlatwater

Distance
8.1 mi
Paddle time
~2.5 hrs
Best for
All skill levels
Put-in → take-out
Put In → Take Out
Curated by PaddleWays

RouteClass III–IV

Distance
11.8 mi
Paddle time
~3 hrs
Best for
Experienced paddlers
Put-in → take-out
USFS-52 Bridge Access → Highway 7 Access
Curated by PaddleWays

RouteClass II

Distance
7.4 mi
Paddle time
~2.5 hrs
Best for
Kayak, canoe
Put-in → take-out
Barrier Dam Boat Ramp → Cowlitz Trout Hatchery Boat Ramp
Curated by PaddleWays

RouteClass II–III

Distance
14.1 mi
Paddle time
~3.5 hrs
Best for
Intermediate paddlers
Put-in → take-out
Nisqually State Park Access → McKenna Park Access
Curated by PaddleWays

RouteClass III–IV

Distance
9.9 mi
Paddle time
~2.5 hrs
Best for
Experienced paddlers
Put-in → take-out
Highway 504 Bridge Access → Tower Bridge Access
Consistent Class III+ rapids with Class IV features
Curated by PaddleWays

RouteClass IV

Distance
8.1 mi
Paddle time
~2 hrs
Best for
Intermediate paddlers
Put-in → take-out
Put In → Take out
Over 3,000 cfs, continuous class IV-IV+

Smarter Paddling Starts in the App.

PaddleWays gives you everything you need to plan smarter, paddle better, and own every trip from first launch to takeout.