RouteClass I
- Distance
- 18.9 mi
- Paddle time
- ~6.5 hrs
- Best for
- Kayak, canoe
- Put-in → take-out
- Highway 8 Access → Flambeau River Confluence Access
Curated by PaddleWays
9.5 mi whitewater route on the Chippewa River in Wisconsin
Level right now
Recommended level from American Whitewater, on the gauge at Bishops Bridge.
Route facts
Bellile Falls rapids after dam releases
About this route
The Arpin Dam Section of the Chippewa River is primarily a flatwater paddle with one notable exception. Bellile Falls, located just below Arpin Dam at the beginning of the run, provides the main whitewater challenge.
The condition and difficulty of these falls can vary depending on water levels and recent dam releases.
Paddlers should exercise caution, especially after a release from Arpin Dam or following periods of heavy rainfall, as the rapids can produce large waves that may be challenging to navigate.
The remainder of the 9.5-mile section is mostly calm, making it suitable for a relaxed paddling experience. This stretch typically takes about 3-4 hours to complete.
The put-in is at the River Road Access below Arpin Dam, where the river forks around a large, densely wooded island.
Put-in and take-out
Put-in
Take-out
Hazards
No paddler has reported a hazard here yet, so these are the dams, falls and big rapids on our map. Hazards change with flows and storms, so check them before you launch.
From the community
Nobody has shared a trip on Arpin Dam Section yet. Paddle it, then tell the next paddler how it went.
The gauges near Arpin Dam Section and the forecast where it starts, so you can pick your day.
No forecast data available.
Same water
The other curated routes on the Chippewa River, each with how it is running now.
Close by
Curated routes on other waters within an hour or so, nearest first.
PaddleWays gives you everything you need to plan smarter, paddle better, and own every trip from first launch to takeout.